Small computer armoire – The joy of doing things on your own is much greater than the joy of saving money to buy the same thing. It’s a performance feeling in both directions, but when you look at something that you cast from start to finish it just feels good. So why not try to make a home-made computer table. This is the simplest furniture building task you will ever do. There is very minimal wood cutting, and a basic hammer and nail technology is all you need
Cut the plywood along the length along the middle. This should leave you with two pieces of plywood measurement 2 by 8 meters. You only need one of these pieces for the small computer armoire. Even if you can choose to use full piece of plywood for a desktop. Apply a stain with plywood and the list if you choose to match it with the file cabinet.
Place the plywood on top of the two file small computer armoire. Place the file cabinet evenly on both sides of the plywood. There is no need to attach plywood to the cabinets because the weight of plywood and computer components will keep it in place. If you choose to do so, simply install L parentheses on the bottom of the plywood and on the side of the cabinet. Cut two pieces of the list to fit around the plywood. You should have two pieces in 8- foot sections and two 2-foot sections. Each section should be cut at 45 degrees at the ends, so when assembled together, they create a perfect corner.